Cemented Carbide Wc-Co Special Custom Parts

• Application: Aviation, Electronics, Industrial, Medical, Chemical
• Standard: GB
• Purity: Yg6X-Yg20
• Alloy: Alloy
• Shape: Irregular Shape
• Type: Custom Special Part
• Model NO.: WC-CO
• Grade: Yg6X-Yg20
• Surface: Sinter State, Grind State
• ISO Grade: K10-K40,M10,P10,P30
• Transport Package: Export
• Trademark: Satellite
• Origin: Mudanjiang
• HS Code: 8101991000
• Production Capacity: 100000pieces/Year

Product Description

Tungsten Carbide Custom Shapes/Forms

  Understanding today's challenges in the design as well as product qualtity of carbide components, Baucor is here to undertake this challenge with you. Whether you are in converting, machinery, equipment, or any other industry, turn to Baucor just like thousands of others for the right and optimum solutions. At its highend facilities, Baucor is committed to designing and manufacturing precision carbide components.
  

  Custom Tungstsen Carbide (WC) parts are made by blending Tungsten Carbide powders with Cobalt binder products to create your custom form via mechanically pressing, machining, sintering, and then diamond wheel grinding to meet your exact specifications. Pieces created can be "end use" pieces, or raw blanks that you finish out with your own internal machining processes, such as for OEM parts.

Examples include:

• Nozzles, Inserts, Intricate Shapes
• Studs and Substrates
• Valve Parts, Rings, Rolls
• Preformed Blanks
• Wear Parts
• Bearings
• Cans and Containers
• Fluid Handling Devices
• Rotary Tool and Die Fabrication: Tools, Tips, Blades, Blanks
• Rock, Coal, Oil Drilling Parts 

  Due to the parts being made from scratch, the WC powder used can be matched to meet the requirements of your piece.  WC powders are custom blended to supply qualities such as extended wear resistance, production heat resistance, pressure resistance, impact, edge strength, etc.

 

Grade	Density g/cm3	Hardness HRA	TRS N/mm2	Application	ISO Code
YG 6X	≥14.6	≥91.5	≥2050	Good wear-resistance. Suitable for drawing steel wire, non-ferrous metal wire,alloy wire and rod with diameter under 6mm under minor stress.	K10
YG 6	≥14.6	≥91	≥2150	Good wear-resistance. Suitable for drawing steel wire, non-ferrous metal wire,alloy wire and rod with diameter under 20mm under large stress.	K10
YG8	≥14.5	≥90	≥2250	Good resistance and toughness .Suitable for drawing of steel, non-ferrous metal rod and tude,or make wear resistance parts.	K30
YG11	≥14.1	≥88	≥2300	Suitable for punching tools, drawing tools working in small pressure.	K40
YG15	≥13.9	≥85	≥2500	Suitable for punching tools, drawing tools working in large pressure.	K40
YG20	≥13.4	≥80	≥2650	Suitable for make cold upsetting ,cold punching and cold pressing mould.	K40
YT5	≥12.5	≥89.5	≥1600	Suitable for rough machinning uneven section of carbon steel,alloy steel and cast steel.	P30
YT15	≥11.0	≥91.5	≥1350	Suitable for Semi-finish turning and finish tuning of carbon steel and alloy steel during interval cutting,or rough milling of continuous section, reaming and rough reaming of cast hole.	P10
YD03	≥9.6	≥92.0	≥1000	Suitable for lardge cutting output semi-finish or finish machining of some materials which difficult to machining ,such as D60 square steel, 58Si Mn,etc.
YW1	≥12.4	≥92.0	≥1450	Suitable for steels hard to machning ,such as heat resistant steel, high-manganese steel,stainess steel,etc. It also used to machining plain steel and cast iron.	M10
YW2	≥12.5	≥90.5	≥1500	Suitable for semi-finish or finish machining of materials hard to machining ,such as heat resistant steel, high manganese steel, stainess steel, and high grade alloy steel,etc. It also used to machning plain steel and cast iron.	M20